FLIR X8580
POAExcluding Tax
Out of stock
Description
High Definition MWIR Science-Grade Camera
The FLIR X8580 midwave IR camera is designed for scientists and engineers who need to capture detailed imagery of high-speed events, perform custom radiometric measurements, or detect points of failure in composites, solar cells, and electronics. This thermal imaging camera combines 1280 × 1024 HD resolution with fast frame rates and integration times, allowing researchers to record stop motion on fast-moving subjects or rapid temperature changes—whether in the lab or on the test range. With a four-position motorized filter wheel and support for FLIR motorized focus lenses, the X8580 will provide higher quality recordings, save time, and mitigate frustration in dynamic acquisition environments.
On-Camera RAM and SSD Recording
Record up to 34 seconds of full HD resolution data directly to on-camera memory, or up to 15 minutes to included 512 GB SSD
Synchronization and Triggering
Capture essential data easily and control image frame generation precisely with dedicated trigger input and new Tri-level Sync input
Multiple Software Interfaces
Stream thermal data directly from the SSD over any of the digital data buses for advanced analysis with FLIR Research Studio software
- Resolution
- 1280 × 1024
- Detector Pitch
- 12 µm
- Spectral Range
- 1.5–5.0 µm
- Detector Type
- FLIR indium antimonide (InSb)
- Camera f-number
- f/2.5
- Dynamic Range
- 14-bit
- NETD
- 30 mK typical
- Frame Rate [Full Window]
- Programmable: ~0.5 Hz to 181 Hz
- Standard Temperature Range [with band matched optics]
- -20°C to 350°C (-4°F to 662°F)
- Optional Temperature Range [with band matched optics]
- ND1: 45°C–600°C (113°F–1112°F) ND2: 250°C–2000°C (482°F–3632°F) ND3: 500°C–3000°C (957°F–5432°F)
- Filtering
- 4-Position motorized warm filter wheel, standard 1-inch filters, user swappable
- Focus
- Motorized (compatible w/manual)
Imaging & Optical
- Available Lenses
- Manual (broadband): 25 mm, 50 mm, 100 mm Motorized (broadband): None
- Camera f-number
- f/2.5
- Close-up Lenses/Microscopes
- No broadband microscopes available
- Detector Pitch
- 12 µm
- Detector Type
- FLIR indium antimonide (InSb)
- Digital Zoom
- 1x, Auto (best fit)
- Direct to SSD Recording
- Yes, removable 512 GB SSD included
- Dynamic Range
- 14-bit
- Filtering
- 4-Position motorized warm filter wheel, standard 1-inch filters, user swappable
- Focus
- Motorized (compatible w/manual)
- Frame Rate [Full Window]
- Programmable: ~0.5 Hz to 181 Hz
- Image Time Stamp
- Internal IRIG-B decoder clock TSPI accurate time stamp
- Lens Interface
- FLIR FPO-M (4-tab bayonet, motorized)
- NETD
- 30 mK typical
- On Camera Image Storage
- RAM (volatile): 16 GB, up to 6,500 frames full frame SSD (user-removable/non-volatile): ~15 minutes of recording with included 512 GB SSD (more than 2 hours possible with 4 TB SSD purchased separately)
- Operability
- ≥99.95% typical
- Overlay
- Customizable (ability to toggle off)
- Palette
- Selectable 8-bit
- Pixel Clock
- 355 MHz
- Radiometric Data Streaming
- Simultaneous Gigabit Ethernet (GigE Vision), Camera Link,CoaXPress® 1.1, dual 5 Gb links
- Readout Modes
- Asynchronous integrate while read, Asynchronous integrate then read
- Readout Type
- Snapshot
- Resolution
- 1280 × 1024
- Sensor Cooling
- Linear sterling cooler
- Spectral Range
- 1.5–5.0 µm
- Standard Video
- HDMI, SDI
- Subwindow Modes
- Flexible windowing down to 64 × 4 (steps of 64 columns, 4 rows)
- Video Modes
- HD-SDI: 720p@50/59.9Hz, 1080p@25/29.97Hz; SD-SDI: 480i@60Hz, 576i@50Hz
Measurement & Analysis
- Accuracy
- ≤100°C: ±2°C (±1°C typical), >100°C: ±2% of reading (±1% typical)
- Ambient Drift Compensation [with factory cal]
- Yes
- Automatic Gain Control
- Manual, Linear, Plateau equalization, ROI, DDE
- Optional Temperature Range [with band matched optics]
- ND1: 45°C–600°C (113°F–1112°F) ND2: 250°C–2000°C (482°F–3632°F) ND3: 500°C–3000°C (957°F–5432°F)
- Standard Temperature Range [with band matched optics]
- -20°C to 350°C (-4°F to 662°F)
Communication & Data Storage
- Synchronization Modes
- Sync In, Sync Out, Tri-Level Sync
Power
- Power
- 24 VDC (<50 W steady state)
Environmental & Certifications
- Mounting
- 2 × 1/4 in -20 / 1 × 3/8 in -16 / 4 × #10 -24 / Side: 3x 1/4 in -20 (each side)
- Operating Temperature Range
- -20°C to 50°C (-4°F to 122°F)
Description
Description
High Definition MWIR Science-Grade Camera
The FLIR X8580 midwave IR camera is designed for scientists and engineers who need to capture detailed imagery of high-speed events, perform custom radiometric measurements, or detect points of failure in composites, solar cells, and electronics. This thermal imaging camera combines 1280 × 1024 HD resolution with fast frame rates and integration times, allowing researchers to record stop motion on fast-moving subjects or rapid temperature changes—whether in the lab or on the test range. With a four-position motorized filter wheel and support for FLIR motorized focus lenses, the X8580 will provide higher quality recordings, save time, and mitigate frustration in dynamic acquisition environments.
On-Camera RAM and SSD Recording
Record up to 34 seconds of full HD resolution data directly to on-camera memory, or up to 15 minutes to included 512 GB SSD
Synchronization and Triggering
Capture essential data easily and control image frame generation precisely with dedicated trigger input and new Tri-level Sync input
Multiple Software Interfaces
Stream thermal data directly from the SSD over any of the digital data buses for advanced analysis with FLIR Research Studio software
Specification
- Resolution
- 1280 × 1024
- Detector Pitch
- 12 µm
- Spectral Range
- 1.5–5.0 µm
- Detector Type
- FLIR indium antimonide (InSb)
- Camera f-number
- f/2.5
- Dynamic Range
- 14-bit
- NETD
- 30 mK typical
- Frame Rate [Full Window]
- Programmable: ~0.5 Hz to 181 Hz
- Standard Temperature Range [with band matched optics]
- -20°C to 350°C (-4°F to 662°F)
- Optional Temperature Range [with band matched optics]
- ND1: 45°C–600°C (113°F–1112°F) ND2: 250°C–2000°C (482°F–3632°F) ND3: 500°C–3000°C (957°F–5432°F)
- Filtering
- 4-Position motorized warm filter wheel, standard 1-inch filters, user swappable
- Focus
- Motorized (compatible w/manual)
Imaging & Optical
- Available Lenses
- Manual (broadband): 25 mm, 50 mm, 100 mm Motorized (broadband): None
- Camera f-number
- f/2.5
- Close-up Lenses/Microscopes
- No broadband microscopes available
- Detector Pitch
- 12 µm
- Detector Type
- FLIR indium antimonide (InSb)
- Digital Zoom
- 1x, Auto (best fit)
- Direct to SSD Recording
- Yes, removable 512 GB SSD included
- Dynamic Range
- 14-bit
- Filtering
- 4-Position motorized warm filter wheel, standard 1-inch filters, user swappable
- Focus
- Motorized (compatible w/manual)
- Frame Rate [Full Window]
- Programmable: ~0.5 Hz to 181 Hz
- Image Time Stamp
- Internal IRIG-B decoder clock TSPI accurate time stamp
- Lens Interface
- FLIR FPO-M (4-tab bayonet, motorized)
- NETD
- 30 mK typical
- On Camera Image Storage
- RAM (volatile): 16 GB, up to 6,500 frames full frame SSD (user-removable/non-volatile): ~15 minutes of recording with included 512 GB SSD (more than 2 hours possible with 4 TB SSD purchased separately)
- Operability
- ≥99.95% typical
- Overlay
- Customizable (ability to toggle off)
- Palette
- Selectable 8-bit
- Pixel Clock
- 355 MHz
- Radiometric Data Streaming
- Simultaneous Gigabit Ethernet (GigE Vision), Camera Link,CoaXPress® 1.1, dual 5 Gb links
- Readout Modes
- Asynchronous integrate while read, Asynchronous integrate then read
- Readout Type
- Snapshot
- Resolution
- 1280 × 1024
- Sensor Cooling
- Linear sterling cooler
- Spectral Range
- 1.5–5.0 µm
- Standard Video
- HDMI, SDI
- Subwindow Modes
- Flexible windowing down to 64 × 4 (steps of 64 columns, 4 rows)
- Video Modes
- HD-SDI: 720p@50/59.9Hz, 1080p@25/29.97Hz; SD-SDI: 480i@60Hz, 576i@50Hz
Measurement & Analysis
- Accuracy
- ≤100°C: ±2°C (±1°C typical), >100°C: ±2% of reading (±1% typical)
- Ambient Drift Compensation [with factory cal]
- Yes
- Automatic Gain Control
- Manual, Linear, Plateau equalization, ROI, DDE
- Optional Temperature Range [with band matched optics]
- ND1: 45°C–600°C (113°F–1112°F) ND2: 250°C–2000°C (482°F–3632°F) ND3: 500°C–3000°C (957°F–5432°F)
- Standard Temperature Range [with band matched optics]
- -20°C to 350°C (-4°F to 662°F)
Communication & Data Storage
- Synchronization Modes
- Sync In, Sync Out, Tri-Level Sync
Power
- Power
- 24 VDC (<50 W steady state)
Environmental & Certifications
- Mounting
- 2 × 1/4 in -20 / 1 × 3/8 in -16 / 4 × #10 -24 / Side: 3x 1/4 in -20 (each side)
- Operating Temperature Range
- -20°C to 50°C (-4°F to 122°F)
Only logged in customers who have purchased this product may leave a review.
Recommended For You
Product You Recently Viewed
FLIR ONE Edge Pro – For iOS® & Android
No Reviews Yet
Write a ReviewShare your thoughts. Be the first to leave a review.